ସମ୍ବନ୍ଧିତ ଉତ୍ପାଦଗୁଡିକ
ବିଜ୍ଞାପନଗୁଡିକ
✕
ଆପଣଙ୍କ ବିଜ୍ଞାପନଗୁଡିକ କିପରି ଚୟନ କରାଯାଏ ଜାଣନ୍ତୁ
ଆପଣଙ୍କ ଇଚ୍ଛା ତାଲିକାରେ ଉତ୍ପାଦ ଯୋଡାଯାଇଛି! ଇଚ୍ଛା ତାଲିକା ଦେଖନ୍ତୁ
କୌଣସି ଡିଭାଇସରେ ଆପଣଙ୍କ ସଂରକ୍ଷିତ ଉତ୍ପାଦଗୁଡିକ ଦେଖିବାକୁ ସାଇନ୍ ଇନ୍ କରନ୍ତୁ
ଆପଣଙ୍କ ଇଚ୍ଛାତାଲିକାରୁ ଉତ୍ପାଦ ଅପସାରଣ ହୋଇଛି! ଇଚ୍ଛାତାଲିକା ଦର୍ଶନ କରନ୍ତୁ
କୌଣସି ଡିଭାଇସରେ ଆପଣଙ୍କ ସଂରକ୍ଷିତ ଉତ୍ପାଦଗୁଡିକ ଦେଖିବାକୁ ସାଇନ୍ ଇନ୍ କରନ୍ତୁ
କିଛି ଭୁଲ୍ ହେଇଯାଇଛି. ଦୟାକରି ପରେ ପୁନଃଚେଷ୍ଟା କରନ୍ତୁ.
ପୂର୍ବରୁ ତୁଳନା କରିବାକୁ ଉତ୍ପାଦ ଯୋଡାଯାଇଛି। ଦୟାକରି ପୃଷ୍ଠା ସତେଜ କରନ୍ତୁ।
ତୁଳନାରେ ଉତ୍ପାଦ ମିଲିଲା ନାହିଁ। ଦୟାକରି ପୃଷ୍ଠା ସତେଜ କରନ୍ତୁ।
5 ଟି ଉତ୍ପାଦ ପୂର୍ବରୁ ଯୋଡାଯାଇଛି। ଦୟାକରି ଏହା ଯୋଡିବାକୁ ବିଦ୍ୟମାନ ଚୟନ ବିଲୋପ କରନ୍ତୁ।
ଏହି ପ୍ରଡକ୍ଟ ସେୟାର କରନ୍ତୁ
Single Gang Surface Mount Box for Raceways, low voltage, Ivory
ଏହି ଉତ୍ପାଦ ବିଜ୍ଞାପନ ସମୟ ସହିତ ପରିବର୍ତ୍ତନ ହୋଇପାରେ
ଅଂଶୀଦାର କରନ୍ତୁSingle Gang Surface Mount Box for Raceways, low voltage, Ivory
This single gang low voltage surface mount box is the final piece to complete your raceway installation. Featuring cut-outs (knockouts) for 3/4 inch, 1 1/4 inch, and/or 1 3/4 inch raceways, you now have the ability to add a pass-through or other faceplate at any point in a raceway run. Simply mount the backplate to the wall and cut out the correspondi…
This single gang low voltage surface mount box is the final piece to complete your raceway installation. Featuring cut-outs (knockouts) for 3/4 inch, 1 1/4 inch, and/or 1 3/4 inch raceways, you now have the ability to add a pass-through or other faceplate at any point in a raceway run. Simply mount the backplate to the wall and cut out the corresponding pattern for the correct raceway size. Screw the top of the box to the mounting plate with the included screws. With knockouts in both the vertical and horizontal positions, this surface mount box continues the raceway system's fully customizable feature. A sharp blade will make quick work of cutting out the appropriately sized notch for the raceway you are using.
ଅଧିକ ସମ୍ବନ୍ଧୀୟ ଉତ୍ପାଦ
ବିଜ୍ଞାପନଗୁଡିକ
✕
ଆପଣଙ୍କ ବିଜ୍ଞାପନଗୁଡିକ କିପରି ଚୟନ କରାଯାଏ ଜାଣନ୍ତୁ
ବର୍ଣ୍ଣନା
This single gang low voltage surface mount box is the final piece to complete your raceway installation. Featuring cut-outs (knockouts) for 3/4 inch, 1 1/4 inch, and/or 1 3/4 inch raceways, you now have the ability to add a pass-through or other faceplate at any point in a raceway run. Simply mount the backplate to the wall and cut out the corresponding pattern for the correct raceway size. Screw the top of the box to the mounting plate with the included screws. With knockouts in both the vertical and horizontal positions, this surface mount box continues the raceway system's fully customizable feature. A sharp blade will make quick work of cutting out the appropriately sized notch for the raceway you are using.
ଫିଡବ୍ୟାକ୍